所有產品分類
進口工業品
您的當前位置：網站首頁 > 產品中心 > 進口工業品
德國basler相機標配線3M-HR6F-AD-PIO
發布時間：2024-06-05
Info
The cable is suitable for the following camera models:
ace GigE (cable not recommended for use with GPIO)
aviator CL (power only)
| Order Number | Cable Length |
|---|---|
| 2200000189 | 5 m |
| 2000029411 | 10 m |
Cable Drawing#
Wiring Information#
| Pin Number | Wire Color | ace GigE without GPIO | ace GigE with GPIO | aviator CL |
|---|---|---|---|---|
| 1 | Brown | Camera Power | Camera Power | Camera Power |
| 2 | Pink | Opto-isolated IN (Line1) | Opto-isolated IN (Line1) | Camera Power |
| 3 | Green | Not connected | GPIO (Line 3) | Not connected |
| 4 | Yellow | Opto-isolated OUT (Out1) | Opto-isolated OUT | Not connected |
| 5 | Gray | Opto-isolated I/O Ground | Opto-isolated I/O Ground | Camera Power Ground |
| 6 | White | Camera Power Ground | Camera Power and GPIO Ground | Camera Power Ground |
For more details, see the respective camera documentation.
Physical Specifications#
| Camera-side Connector | Hirose 6 pin [HR10A-7P-6S (73)] |
| Host-side Connector | None, open end |
| Cable Cross-section | 3 x 2 x 0.14 mm2 (close to AWG 26) |
| Cable Diameter | 5.8 mm |
| Wire Insulation | PVC |
| Outer Jacket | PVC |
| Minimum Bending Radius | 34.8 mm (6 x cable diameter), fixed installation |
| Maximum Bending Cycles | None (fixed installation only) |
| Suitable for Drag Chain Applications | No |
| Suitable for Robotics Applications | No |
Electrical Specifications#
| Maximum Operating Voltage | See camera documentation for the power requirements of your camera. |
| Test Voltage | 1200 VDC |
| Wire Resistance | ≤142 Ω/km |
Environmental Specifications#
| Operating Temperature Range | -25–80 °C, not moving |
Plug Specifications#
| Durability | >1000 mating cycles |
| Contact Resistance | 10 mΩ max. |
| Contact Plating | Gold |
| Protection Rating | IP40 |
| Plug Insulation Material | Polyamide/PBT |
友情鏈接Link
